ASSA ABLOY DC700G-FT BGS

x.xx

Login to view price

Product Information

  • ASSA ABLOY door closer with Cam-Motion® technology, extended mounting plate and integrated latch bolt, extended guide rail with integrated escape door strike
  • Suitable for retrofitting an electric lock on doors with no fire or smoke control requirements
  • Certified in compliance with EN 1154, size 3-6
  • Escape door strike 332®, tested in compliance with the guideline for electrical locking systems for doors along escape routes
  • For single leaf doors, doors between 850 - 1,200 mm wide

Capability characteristics DC700G-FT BGS

  • Integrated escape door strike 332® in extended guide rail
  • Integrated latch bolt 807 on extended mounting plate
  • with 4 m connecting cable
  • Flush or surface installation of wiring possible
  • Suitable for left and right handed doors
  • Standard installation on non-hinge side
  • Variable adjustable closing force
  • Closing speed, latching speed and backcheck continuously adjustable
  • Thermodynamic valves for consistent performance
  • Axis continuously height adjustable up to 14 mm
  • Standard colours: silver EV1

Characteristics escape door locking system

  • Holding force of 2,000 N
  • Latch position continuously adjustable between 12 mm and 17 mm
  • Latch position adjustable horizontally between -3 mm and +6 mm
  • Latch bolt can be adjusted vertically in 4 mm increments (-4/ 0/ +4/ +8)
  • Escape door strike using FaFix®, adjustable by 2 mm (0.5 mm steps)

Characteristics of guide rail

  • Height-adjustable by 2 mm for tolerance
  • Concealed fastening screws

view construction details

Technical data
Variable adjustable closing force: EN 3-6
Door width up to: 850 mm - 1.200 mm
DIN door swing directions: Left / right handed
Standard installation on non-hinge side: Yes
Closing speed: Variable between 170°-0°
Latching speed: Variable between 15°-0°
Backcheck: Variable above 75°
Opening angle non-hinge side: ca. 120°
Door closer certified in compliance with: EN 1154
CE marking for building products: Yes
Mounting plate dimensions: see dimensional drawings
Dimensions of guide rail: see dimensional drawings
Holding force: 2000 N
Rated voltage: 12 V DC / 24 V DC
Rated current: 190 mA / 12 V; 95 mA / 24 V
Rated operational voltage tolerance: +/- 10 %
Operating temperature range: -15 °C to +40 °C
Switching capacity - monitoring contact: 24V, 1 A
Armature contact not potential-free: Yes
Recovery diode: Yes
Certified in compliance with: EltVTR
Approved system im compliance with EltVTR: Escape route controller

 

Product Code: ASSIPLCR43

 

Mobile Site